Initially, check to see that the repeater is placed in the best location feasible, ideally close to your primary router and free of any obstructions. As a result, the signal's strength will be improved. Use the Wavlink WiFi repeater's default IP address, which is often 192.168.10.1, to access the settings. Enter the IP address in a web browser's address bar. The repeater's settings page will then show up. Go to the wireless settings when you've arrived on the 192.168.10.1 WiFi repeater setup page. Make sure that the repeater is connected to the appropriate WiFi network, then type the relevant password. You might also want to consider changing the channel to lessen interference from neighboring networks. Make sure the firmware on your Wavlink repeater has been updated. Manufacturers frequently provide firmware updates to improve performance and address connectivity issues. On the Wavlink website, you may find the latest firmware for your specific repeater model.