African Valve is the top Pneumatic Knife Gate Valve Manufacturers in Libya. It is a type of valve that controls the flow of semi solid material with an actuator that functions with compressed air. A knife-edge gate valve is attached that moves perpendicular to the flow path to either block or allow the flow of material. In this valve the gate is connected to a pneumatic actuator, which is a device that converts the energy of compressed air into mechanical motion, when it receives a signal it directs the compressed air to either open or close the gate valve, when the valve is open the gate lifted and allow the fluids and gases to pass through the valve and when the valve is close, the gate is lower create a tight seal and block the flow.
Pneumatic Actuated Knife Gate Valve are commonly used in industries such as mining, wastewater treatment, pulp and paper, and chemical processing, where reliable performance and durability are critical
Advantages of Pneumatic Knife Gate Valve:
- Precious flow control
- Tight shut off
- Fast and reliable operation
- Simple and robust design
- Wide range of materials and sizes
Industries:
- Chemical industry
- Refineries
- Mining and Mineral process
- Power Plant
- Cement Industry
Configuration of a Pneumatic Actuator:
- 4-20 Mamp
- Pneumatic single acting actuators
- Pneumatic double acting actuators
- Pneumatic rotary actuators
- Pneumatic Scotch and Yoke actuators
- Pressure: 228 bar
Temperature:
- Standard -4°F to 200°F (-20°C to 93°C)
- Low -40°F to 176°F (-40°C to 80°C)
- High 0°F to 300°F (-18°C to 149°C)
Description:
- Available materials: WCB, WC6, WCC, LCB, LCC, Cast iron, Ductile Iron, SS316, SS304
- Size: 2″ to 80″
- Class: 150 to 300
- Nominal Pressure: PN6 to PN40
- Operation: Pneumatic Actuated Knife Gate Valve.
- Ends: Wafer, Lug, Flanged
Visit our website For more detail: https://www.africanvalve.com/product-category/pneumatic-actuated-knife-gate-valve/
42, Local Airport road Ikeja, 300001, Lagos, Nigeria
